#CORSAIR H50 VS H60 V INSTALL#

The bundled thermal paste is not the bestВ weвЂ™veВ ever worked with, but is good enough to do the job. This helps with avoiding mounts that are too tight or too lose (both of which will result in sub-par performance). Tightening the mounting screws on the CPU block was easy enough, and they give plenty of feedback so youвЂ™ll know when theyвЂ™re in place. The hoses are also long enough for the unit to be installed in large cases such as the Cooler Master ATCS 840 without being too long and getting in the way. Connecting the radiator to the chassis was also a breeze, with the plastic hoses bending easy enough not to become an issue. Installing the Seidon 120M took less than 5 minutes on an Intel LGA 1155 platform and was one of the easier unitsВ weвЂ™veВ installed. These new plastic hoses are slightly stiffer than the previous rubber ones however we had no problem installing the Seidon and were happy with the plastic hoses. вЂњWeвЂ™ve tested our вЂplasticвЂ™ hoses to have far more resistance to evaporative liquid loss,вЂќ he continued. вЂњRubber hoses weвЂ™ve tested have too high evaporation loss, we know because we used them in 2009 with the Aquagate Viva, and the original R120 all in one cooler,вЂќ according to a Cooler Master vendor rep on the Forums. However, according to a Cooler Master rep, the evaporation loss of liquid with rubber hoses is too high. Previous Cooler Master all-in-one coolers used rubber hoses which are easier to bend and maneuver around a case. The setup also comes with Cooler Master branded thermal paste for the CPU, allowing for multiple applications rather than just a single application if the thermal compound was pre-installed on the cooling block. This usually results in a higher amount of flow through the radiator, improving cooling performance. One is set up to push air through, while the other on the opposite side pulls the air. A push pull configuration is where two fans are installed on either side of the radiator. The cooling unit is bundled with a single PWM fan (600rpm to 2,400rpm), however, there are mounting screws and holes on the radiator for an additional 120mm fan to be set up in a push pull configuration.

#CORSAIR H50 VS H60 V INSTALL#

The fan and radiator are also on the thin side вЂ“ a major plus if the user wants to install the Seidon 120M into an HTPC or case with very little room to spare. The Seidon 120M also features a low profile block/pump to fit smoothly into any case.

The mounting options are also self explanatory to seasoned hardware installers, though there are easy to understand for the less experienced. This includes LGA 2011, LGA 1366, LGA 1156, LGA 1155 and LGA 775, as well as FM1, AM3+, AM3 and AM2. Like other water-cooling solutions of its kind, the Seidon 120M can be installed by a user who has not dealt with water-cooling before, and once installed, requires no more attention than a basic air-cooler.ДЄnother standout feature of the Seidon 120M is the installation compatibility with every Intel and AMD platform available today. All the elements of the water cooling loop are enclosed into a sealed unit, which eliminates the risk of leaks due to improper installation, and negates the need for refilling the loop. The main feature of the Seidon 120M is the all-in-one maintenance-free approach. Cooler MasterВ hasnвЂ™tВ been idle though, and have a new water cooling system to try and reclaim the top spot, the Seidon 120M. Fast forward a couple of years, and companies such as Antec and Corsair are dominating the all-in-one liquid cooling market. Cooler Master is no stranger to all-in-one liquid cooling solutions, and after all their Aquagate products took the South African hardware community by storm in 2009, every second gamer has been wanting a piece of the water-cooling action.

Corsair h50 vs h60 v